MFC-9440CN
 |
FAQs & Troubleshooting |
MFC-9440CN
Date: 26/03/2007 ID: faq00000292_026
What kind of memory can I use?
This machine has 64 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 576 MB by installing dual in-line memory modules (SO-DIMMs). When you add the optional memory, it increases the performance for both copier and printer operations.
In general, the SO-DIMM must have the following specifications:
- Type: 144 pin and 64 bit output
- CAS Lantency: 2
- Clock Frequency: 100 MHz or more
- Capacity: 64, 128, 256 or 512 MB
- Height: 31.75 mm (1.25 inches)
- DRAM Type: SDRAM 2 Bank
- There might be some SO-DIMMs that will not work with the machine.
- For more information, call Brother Customer Service.
This type of memory SO-DIMM is available from most major memory suppliers.
The chart below lists the part numbers.
Buffalo SO-DIMM
| Capacity | Buffalo part number |
| 128 MB | VN133-D128/MF VN133-D128/SD |
| 256 MB | VN133-D256/MB VN133-D256/SD |
| 512 MB | VN133-D512/SCD |
TechWorks SO-DIMM
| Capacity | Buffalo part number |
| 128 MB | 12462-0001 |
| 256 MB | 12485-0001 |
| 512 MB | 12475-0001 |
For more information, visit the Buffalo Technology site at
http://www.buffalo-technology.com.
Related FAQs
DCP-9040CN, MFC-9440CN, MFC-9450CDN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.