MFC-9420CN
 |
FAQs & Troubleshooting |
MFC-9420CN
Date: 08/11/2005 ID: faq00000292_011
What kind of memory can I use?
The SO-DIMM that can be used with the machine must have the following specifications:
| 64 MB | TechWorks | 12345-0001 |
| 128 MB | 12462-0001 | |
| 256 MB | 12485-0001 | |
| 512 MB | 12475-0001 |
| Tyep | 144 pin and 64 bit output |
| CAS latency | 2 or 3 |
| Clock frequency | 100 MHz or more |
| Capacity | 64 MB to 512 MB |
| DRAM type | SDRAM |
- The machine has 64 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 576 MB by installing a commercially available SO-DIMM (Dual In-line Memory Module).
- There might be some SO-DIMMs that will not work with this machine.
- For more information, contact Brother Customer Service.
MFC-9420CN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.