Innov-is VM6200D
 |
FAQs & Troubleshooting |
Innov-is VM6200D
Date: 07/04/2009 ID: faqh00000010_000
Fabrics and stabilizer material for embroidery
Fabrics and stabilizer material for embroidery
| Fabric | Stabilizer material | Reference | ||
| Type | Material | Top surface of fabric | Underside of fabric | |
|
Medium weight fabrics Shirt/Apron |
Cotton |
Not required. |
Attach a stabilizer by ironing. | |
|
Thick fabrics |
Denim |
Not required. |
Attach a stabilizer by ironing. |
It's better to place a stabilizer material on the top surface of fabric when you sew quilting. |
|
Thin fabrics |
Georgette |
Place a stabilizer on. |
Attach a stabilizer by ironing. |
Temperature of iron should be "low". |
|
Stretch fabrics |
Knit |
Place a stabilizer on. |
Attach a stabilizer by ironing. | |
|
Towel cloth Towel |
Towel |
Place a stabilizer on. |
Place a stabilizer material under a fabric without attaching it and then hoop the fabric and the stabilizer together. |
Caution: |
- Even though "Not required" is mentioned in the above list, use a stabilizer material for more attractive embroidery result if necessary.
Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 4000D/4000, Innov-is 500D, Innov-is 6750D, Innov-is 900, Innov-is 950, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is VE2200, Innov-is VE2300, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, PE-770, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SuperGalaxie 3000/3000C/3000D/3100D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.