FAQs & Troubleshooting

Close

Innov-is A80

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is A80

Not your product?

Date: 19/02/2020 ID: faqh00101511_001

How to change the needle stop position

Changing the needle stop position

As a default, it is set to leave the needle lowered in the fabric when sewing is stopped. You can select the needle stop position (the needle position for when the machine is not being operated) to be up or down.

 

The needle position when stitching is finished can be changed from the down position to the up position.

 

  1. Press the needle position button and hold for approximately 3 seconds.

    img01


     
  2. The machine beeps twice, and the needle stop position changes to the up position.

     

    * Needle position setting indicator on the LCD screen changes as follows.

    img02

    When this setting is changed, the machine beeps, even if the buzzer is turned off.

 

 

The needle position when stitching is finished can be changed from the up position to the down position.

 

When the same operation is performed, the needle stop position changes to the down position.

 

  1. Press the needle position button and hold for approximately 3 seconds.

    img03


     
  2. The machine beeps once, and the needle stop position changes to the down position.

     

    * Needle position setting indicator on the LCD screen changes as follows.

    img04

    Needle position setting indicator:

    It shows whether the needle is in the programmed raised or lowered position. In addition, it also shows whether the single needle mode or twin needle mode is selected. (The twin needle mode indicator appears only on models equipped with the needle mode selection key.)

    img05 : down position (single needle mode)   img06 : up position (single needle mode)
    img07 : down position (twin needle mode)   img08 : up position (twin needle mode)

     

 

Related Models

Innov-is A80

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.