FAQs & Troubleshooting

Close

Innov-is 610

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is 610

Not your product?

Date: 21/03/2013 ID: faqh00000686_000

For better results when sewing stretch fabrics

To achieve better results when sewing your project with stretch fabrics, refer to the following tips.

  • To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing on stretch fabrics.

  • Use thread for knits or a stretch stitch.

  • First, baste the pieces of fabric together, and then sew without stretching the fabric.

    fig001

    (1) Basting


  • Place thin paper or stabilizer material under the fabric and sew it together with the fabric.
    * When you have finished sewing, tear off any excess paper.

    fig002

    (2) Stabilizer material or thin paper


  • Decrease the pressure of the presser foot. (It is applied to models equipped with the function to adjust the presser foot pressure)

 

Related Models

BC-2500, CS-6000/6000b/6000t, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 200/200QE, Innov-is 210, Innov-is 400, Innov-is 4000D/4000, Innov-is 410, Innov-is 600, Innov-is 610, Innov-is 6750D, Innov-is 900, Innov-is 950, Innov-is BQ3100, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, Innov-is VQ2400, Innov-is VQ3000, NS10, NS15, NS25, NS30/30LE, NS35, NS55, NX-200/200QE, NX-250, NX-400Q/400, NX-450, NX-600, QC-1000, QC-2000

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.