Care and Maintenance (Cleaning Inside the Machine)
If there are vertical lines or blank areas in the scanned image, lint or dust may have accumulated in the machine. The Lint may also attach to the surface of the feed rollers, preventing a mat to be loaded or unloaded correctly. Use a soft brush to clean it.
Turn off the machine and disconnect the power cord plug, and then disconnect the AC adapter plug from the DC power jack on the back of the machine.
Open the cover on the front of the machine.
Remove the holder from the carriage.
Use a commercially available brush to clean around the feed slot and the carriage.
CM110, CM350, CM550DX/ CM550, CM900
If you need further assistance, please contact Brother customer service:
Please note this form is used for feedback only.