FAQs & Troubleshooting

Close

1034D

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 25/08/2015 ID: faqh00000499_000

Threading the left needle

Run the thread in the sequence illustrated, following the yellow color and the numbers next to each threading point.

 

 

 

  1. Pull the thread off the spool and directly up through the thread guide on the thread tree from back to front.

    Pull the thread about an extra 15cm (6inches) through the front of the thread tree.

     

  2. Pass the thread through the proper thread guide.

     

  3. Slide and hold the thread tension release button to the right, then pass the thread through the tension disc which is in the channel next to the yellow tension adjustment dial.

    Release the button.

     

  4. Guide the thread down the channel and across through the threading points next to the yellow color marks following the numerical order in the accompanying illustration.

     

  5. Bring the thread down through the guide 7 above the needle and through the left needle from front to back.

 

Related Models

1034D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.