FAQs & Troubleshooting


Model discontinued. This page is no longer updated.


FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 19/11/2012 ID: faq00000299_004

How do I program the date and time?

To set the date and time, follow the instructions listed below:

  1. Press the Menu/Set key on the Control Panel.
  2. Press the up or down navigation key and select INITIAL SETUP, then DATE/TIME.
  3. The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 03 for 2003).
  4. Press the Menu/Set key.
  5. The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
  6. Press the Menu/Set key.
  7. The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
  8. Press the Menu/Set key.
  9. The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
  10. Press the Menu/Set key.
  11. Press the Stop/Exit or Stop key on the Control Panel.

The LCD will display the date and time whenever the unit is idle.

Related Models

FAX-727, FAX-737MC, FAX-827/FAX-827S, FAX-837MC/FAX-837MCS, FAX-878

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.