The printer will print the printer configuration after the Gap/Black Mark Sensor calibration. (To print the Self-test printouts, see the FAQ: "How to execute the printer configuration (Self-test) to debug".)

Self-test printouts list the printer's configuration and available memory space, and can indicate whether there is any dot damage on the heater component.

Self-test printout

	1. Model name 2. F/W version 3. Firmware checksum 4. Printer S/N 5. Configuration file 6. System date 7. System time 8. Printed mileage (meter) 9. Cutting counter 10. Number of bad dot in the print head
	1. Print speed (inch/sec) 2. Print darkness 3. Label size (inch) 4. Gap distance (inch) 5. Gap/Black Mark Sensor sensitivity 6. Code page 7. Country code
	ZPL setting information 1. Print darkness 2. Print speed (inch/sec) 3. Label size 4. Control prefix 5. Format prefix 6. Delimiter prefix 7. Printer power up motion 8. Printer head close motion ZPL is emulating for Zebra® language.
	RS232 serial port configuration
	1．Printer name 2．Mac Address 3．DHCP 4．IP Address 5．Subnet Mask 6．Gateway 7．RAW Port
	1. Numbers of download files    Total & available memory space 2. Print head check pattern