FAQs & Troubleshooting

Close

PT-D610BT

FAQs & Troubleshooting

FAQs & Troubleshooting

PT-D610BT

Not your product?

Date: 23/04/2020 ID: faqp00001298_004

My label is not cut automatically after printed.

Check if "Cut Option" is set to "Chain", "No Cut", or "Special Tape". The tape is not cut after each label is printed or only cut after the last label is printed depending on the tape cutting option setting.

 

Please refer to the following methods of cutting after each label is printed, and cutting after the last label is printed.

 

Method 1. Automatically cut after each label is printed.

Method 2. Cut after the last label is printed.

 

Method 1. The tape can be cut automatically after each label is printed by changing the "Cut Option" setting.

If you are using Fabric Iron-on Tapes or Extra Strength Adhesive tapes, select the "Special Tape" setting to protect the cutter blade. After printing, remove the tape cassette from the printer and use scissors to cut the tape.

  1. Press the [Function] key ( function key ) to display the Edit menu.
     
  2. Select "Cut Option" using up arrow key or down arrow key key, and then press the [OK] key ( ok key ) or [Enter] key ( enter key / enter key ).
     
  3. Select "Large Margin" or "Small Margin" using up arrow key or down arrow key key, and then press the [OK] key ( ok key ) or [Enter] key ( enter key / enter key ).

 

Method 2. Cut the last label which is not fed and cut automatically.

If you printed on Fabric Iron-on Tapes or Extra Strength Adhesive tapes, feed the tape to create an enough margin, then remove the tape cassette from the printer and cut the tape using scissors. Please refer to the steps below.

  1. After the last label is printed, hold down the [Shift] key ( shift key / shift key ) and press the [Preview] key ( preview key ) to display the "Feed & Cut" menu.
     
  2. Using up arrow key or down arrow key key, select "Feed & Cut" if you have the printer cut the label, or select "Feed Only" if you cut the tape manually.
    Press the [OK] key ( ok key ) or [Enter] key ( enter key / enter key ).

Related Models

PT-D600, PT-D610BT

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.