In order to extend the life of the embroidery machine’s parts and keep the machine operating correctly, be sure to oil the machine before the first time that it is used. If too little oil was applied to the race, an error message may appear.
Afterward, put a drop of oil onto the hook once a day before use, and put a drop of oil to the lower needle bar felt washer every 40 to 50 hours of machine use.

Oiling the race

1. Touch
   
    
2. Touch
   
   
   
   Following message appears.
   
   


3. Open the hook cover, and remove the bobbin case.
   
   


4. Touch "OK".
   The race moves to the correct position for oiling.


5. Put a drop of oil onto the hook.
    

   Front angle view		Side view

   
   (1) Punch a small hole in oil bottle.
   (2) Apply oil here.
    

    

6. Touch "OK" appeared in the following screen.
   The race backs to its original position.
   
   


7. After oiling, insert the bobbin case into the hook, and then close the hook cover.
    

   

   Be sure to close the hook cover before using the embroidery machine. The fabric is caught and causes the trouble if the hook cover is opened.

Oiling the needle bars

From embroidering screen, select one needle bar at a time. Turn the handwheel counterclockwise bringing the needle bar to its lowest position. Put one drop of oil, as high as possible on the needle bar above the felt washer.
 

(1) Apply oil here.