FAQs & Troubleshooting

Close

Innov-is VE2200

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is VE2200

Not your product?

Date: 07/04/2009 ID: faqh00000010_000

Fabrics and stabilizer material for embroidery

Fabrics and stabilizer material for embroidery

 

Fabric Stabilizer material Reference
Type Material Top surface of fabric Underside of fabric

Medium weight fabrics Shirt/Apron

Cotton

Not required.

Attach a stabilizer by ironing.  

Thick fabrics
Jeans/Jumper

Denim
Quilting

Not required.

Attach a stabilizer by ironing.

It's better to place a stabilizer material on the top surface of fabric when you sew quilting.

Thin fabrics
Curtain/Liner

Georgette
Organdy

Place a stabilizer on.

Attach a stabilizer by ironing.

Temperature of iron should be "low".

Stretch fabrics
Sweatshirt/Vest

Knit
Jersey

Place a stabilizer on.

Attach a stabilizer by ironing.  

Towel cloth Towel

Towel
(pile)

Place a stabilizer on.

Place a stabilizer material under a fabric without attaching it and then hoop the fabric and the stabilizer together.

Caution:
If you attach stabilizer material to towels etc. by ironing, loops of the fabric might be expanded when removing the stabilizer.


 

  • Even though "Not required" is mentioned in the above list, use a stabilizer material for more attractive embroidery result if necessary.

Related Models

Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 4000D/4000, Innov-is 500D, Innov-is 6750D, Innov-is 900, Innov-is 950, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is VE2200, Innov-is VE2300, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, PE-770, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SuperGalaxie 3000/3000C/3000D/3100D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.