FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

HL-1440

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 19/11/2007 ID: faq00002249_000

The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?

 


 

If the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset. 
Reset the Drum counter as follows:

 

Do not reset  the Drum counter when you do not replace the Drum unit.

  1. Open the front cover.
  2. Locate the control panel button under the LED lights on the left side.
  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.

Related FAQs

Related Models

HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.