HL-3450CN
FAQs & Troubleshooting |
HL-3450CN
Date: 16/10/2006 ID: faq00000292_020
What kind of memory can I use?
This printer has 64 Mbytes of standard memory. The memory can be expanded up to 384 Mbytes. When you want to upgrade to more than 320 Mbytes, you need to remove the already installed 64 Mbyte DIMM and replace it with a higher capacity DIMM. (The standard installed memory can vary depending on the printer model and country.).
The installation additional memory can help the printer process the print job faster and reduce the chance of the printer running out of memory if you are printing complex graphical print jobs.
The following capacity of DIMMs can be installed:
<Europe>
Size |
Manufacture |
No. |
16 MB | BUFFALO TECHNOLOGY | 12323-0001 |
32 MB | BUFFALO TECHNOLOGY | 12324-0001 |
64 MB | BUFFALO TECHNOLOGY | 12325-0001 |
128 MB | BUFFALO TECHNOLOGY | 12326-0001 |
<USA>
Size |
Manufacture |
No. |
16 MB | TECHWORKS | 12456-0001 |
32 MB | TECHWORKS | 12457-0001 |
64 MB | TECHWORKS | 12458-0001 |
128 MB | TECHWORKS | 12459-0001 |
For more information, visit Techworks/Buffalo web site at http://www.techworks.com/
In general, the DIMM must have the following specifications:
Type: | 100 pin and 32 bit output |
CAS Latency: | 2 |
Clock frequency: | 66 MHz or more |
Capacity: | 16, 32, 64 MB or 128 MB |
Height: | 46 mm (1.8 inches) or less |
Parity: | None |
DRAM Type: |
64M bit SDRAM 4 Bank |
For more information, consult with the dealer where you purchased the printer.
Content Feedback
Please note this form is used for feedback only.