MFC-J4510DW
FAQs & Troubleshooting |
MFC-J4510DW
Date: 13/12/2022 ID: faq00000253_024
Is there a way to view how much ink is remaining?
You can check the ink status by running the Status Monitor (Status Monitor is installed automatically when installing the MFL-Pro Suite Software) or from the control panel. Follow the steps listed below to check the ink status.
NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.
1. Check the ink status from the control panel
-
Press .
You can also press and Ink.
- Press Ink Volume. The Touchscreen shows the ink volume.
- Press .
2. Check the ink status from the Status Monitor utility
*Windows users:
Open the Status Monitor. (Click here to see how to start Status Monitor.)
*Mac OS X users:
Open the Status Monitor. (Click here to see how to start Status Monitor.)
3. Check the ink status from the ControlCenter
*Windows users:
Open the ControlCenter.
-
Brother Utilities supported models
-
Open Brother Utilities.
-
Windows 7 / 10 / 11
Click or (Start) > (All Programs or All apps >) Brother > Brother Utilities. -
Windows 8
On the Start screen, click .
If is not on the Start screen, right-click somewhere on an empty spot, and then click, All Apps from the bar.
Click Brother Utilities.
-
Windows 7 / 10 / 11
- Select Scan.
- Click ControlCenter4.
-
Open Brother Utilities.
-
Brother Utilities unsupported models
Click (Start) > All Programs > Brother > XXX-XXXX (your model name) > ControlCenter4.
<Home Mode>
<Advanced Mode>
*Mac OS X users:
-
Open the ControlCenter.
To open the ControlCenter2 application, click Go from the Finder bar, Applications > Brother > ControlCenter. Double click the ControlCenter.
The ControlCenter will open and an icon will be placed in the dock. -
Click on DEVICE SETTINGS on the left options then click on Ink Level button.
MFC-J4510DW, MFC-J4710DW, MFC-J650DW, MFC-J870DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.