FAQs & Troubleshooting

Close

DCP-195C

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 19/11/2014 ID: faq00000063_027

How do I load envelopes into my machine?

 

  • Use envelopes that weigh from 20 to 25 lb (80 to 95 g/m2).
  • Some envelopes need margin settings to be set in the application. Make sure you do a test print first.

 

 

 

 

Do not use any of the following types of envelopes, as they will cause paper feed problems:

  • Envelopes that are of a baggy construction.
  • Envelopes that are embossed (have raised writing on them).
  • Envelopes that have clasps or staples.
  • Envelopes that are pre-printed on the inside.

 

 

You may occasionally experience paper feed problems caused by the thickness, size, and flap shape of the envelopes you are using.




 

Step 1: Load envelopes and post cards:

 
  1. Before loading, press the corners and sides of the envelopes or post cards to make them as flat as possible.

    If the envelopes or post cards are "double-feeding," put one envelope in the paper tray at a time.

     
  2. Put envelopes or post cards into the paper tray with the address side down and the leading edge in first as shown in the illustration. With both hands, gently press and slide the paper side guides (1) and paper length guide (2) to fit the size of the envelopes or post cards.
 



Step 2: Change the printer driver settings:


 

  1. Open Printing Preferences. (Click here to see how to open Printing Preferences.)
     
  2. Select an appropriate size for Paper Size and click OK.

Image

 

 

 

 

If you have problems when printing on envelopes, try the following suggestions:

 

  1. Open the envelope flap.
     
  2. Make sure the open flap is either to the side of the envelope or to the back edge of the envelope when printing.

     

  3. Adjust the size and margin in your application.
 

Related FAQs

Related Models

DCP-165C, DCP-185C, DCP-195C, DCP-385C, DCP-585CW, DCP-6690CW, DCP-J125, MFC-255CW, MFC-290C, MFC-295CN, MFC-490CW, MFC-5890CN, MFC-6490CW, MFC-6890CDW, MFC-790CW, MFC-795CW, MFC-990CW, MFC-J220, MFC-J265W, MFC-J410, MFC-J415W, MFC-J615W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.