HL-L2375DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hll2375dw_eu_as.jpg)
HL-L2375DW
Date: 13/07/2018 ID: faq00000017_036
Ghosting images
Check the following points to resolve the issue:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Check the machine's environment. Conditions such as low humidity and low temperatures may cause this print quality issue.
Refer to Product Safety Guide available on the Manuals section. - Select the appropriate media type in the printer driver.
-
(Not available for some models)
Select the appropriate media type in the menu setting. -
Make sure the two green levers inside the back cover are in the up position. Pull up the two green levers until they stop.
-
Clean the drum unit.
> Click here to see how to clean the drum unit. -
Replace the drum unit with a new drum unit.
> Click here to see how to replace the drum unit. -
Replace the toner cartridge with a new toner cartridge.
> Click here to see how to replace the toner cartridge. - The fuser unit may be contaminated. Contact Brother Customer Service from "Contact Us."
HL-L2310D, HL-L2375DW, MFC-L2713DW, MFC-L2770DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.