HL-8050N
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl8050n_all.jpg)
HL-8050N
Date: 26/04/2013 ID: faq00000014_001
Vertical blanks appear.
![](/g/b/img/faqend/faq00000014_001/nz/en/90058/P355072A.gif)
Please check the following points:
-
Is the toner cartridge properly installed in the printer?
Make sure that the toner cartridge is installed properly.
To see how to replace the toner cartridge, click here.
-
The transfer roll cartridge, or fuser unit might be old or damaged. We recommend you replace them as necessary. To see how to replace the Fuser Unit & Transfer roll Cartridge, click here.
-
Dirt might be on the laser window. Clean the laser window.
![](/g/b/img/faqend/faq00000014_001/nz/en/90057/8050N_188.gif)
HL-8050N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.