HL-7050
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl7050_all.jpg)
HL-7050
Date: 26/04/2013 ID: faq00000011_010
White spots appear in areas of dense black printing.
![](/g/b/img/faqend/faq00000011_010/nz/en/90041/hollow.gif)
Please check the following points:
-
Make sure that you use paper that meets our specifications. To see what kind of paper you can use, click here.
-
Make sure the printer's environment is appropriate because conditions such as high humidity can cause hollow print.
-
Choose "Thick paper" mode in the printer driver, or use thinner paper than you are currently using. Check if the setting next to "Media Type" is as it should be.
![](/g/b/img/faqend/faq00000011_010/nz/en/6399/basic1.jpg)
Related FAQs
HL-7050, HL-7050N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.