HL-1212W
![]() |
Vanlige spørsmål og feilsøking |
![](/g/b/img/product/hl1212w_us_eu.jpg)
HL-1212W
Dato: 25.07.2014 ID: faq00000105_035
Reset the network settings to the factory default
You can use your machine's On/Off button to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
- You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3, or Web Based Management.
-
Make sure the power cord is plugged in, the top cover is closed and the machine is turned off.
-
While holding down
(Power On/Off), open and close the top cover.
-
Release
(Power On/Off). Make sure that all the LEDs turn off.
-
Press
(Power On/Off) six times.
The machine will restart.
Hvis du trenger ytterligere hjelp, kan du ta kontakt med Brothers kundeservice:
Tilbakemelding om innhold
Du kan hjelpe oss å forbedre kundestøtten vår ved å gi tilbakemelding nedenfor.
Trinn 1: Hvordan synes du informasjonen på denne siden hjelper deg?
Trinn 2: Ønsker du å legge til noen kommentarer?
Merk at dette skjemaet kun benyttes for tilbakemeldinger.