HL-5240L
![]() |
Veelgestelde vragen en probleemoplossing |
![](/g/b/img/product/hl5240l_eu.jpg)
HL-5240L
Datum: 25-10-2005 Nummer: faq00000402_001
The printer cannot print full pages of a document. An error message PRINT OVERRUN is printed out.
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program.
![](/g/b/img/faqend/faq00000402_001/eu_ot/en/3316/page_protection1.gif)
- Change the following settings in the Windows® printer driver, and then try again. The best combination of the settings below will vary depending on your document:
+Graphics mode
+TrueType mode
+Use printer TrueType® fonts
To change these settings, click 'Advanced' tab of the printer driver. Select 'Manual' in the 'Print Setting' section. Click 'Setting...'.
![](/g/b/img/faqend/faq00000402_001/eu_ot/en/3317/setting2.gif)
HL-5240, HL-5240L, HL-5250DN
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
Feedback
Geef hieronder uw feedback. Aan de hand daarvan kunnen wij onze ondersteuning verder verbeteren.
Stap 1: is de informatie op deze pagina nuttig voor u?
Stap 2: wilt u nog iets toevoegen?
Dit formulier is alleen bedoeld voor feedback.