QC-1000
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_qc1000eas.jpg)
QC-1000
Date: 20/11/2012 ID: faqh00000019_000
Why does the needle keep breaking?
There could be several reasons why the needle keeps breaking.
- Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible.
- The needle could have been damaged or bent.
If so replace with a new one.
- Make sure the fabric is not pulled excessively when sewing.
Let the feed dogs move the fabric.
Do not pull the fabric.
- The combination of needle size, thread size and fabric is incorrect.
Be sure to use the correct needle and thread size for the fabric you are sewing.
(example: Denim-size 16 needle and 40-50 heavy duty thread).
One Point Advice Combination of fabric, thread and needle
Related FAQs
AS1430S, AS2730S, BM-3500/2600, FS101, FS155, GS2700, GS2786K, GS3710, Innov-is 10, Innov-is 1500D/1500, Innov-is 15P, Innov-is 30, Innov-is 35P, Innov-is 400, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 50, Innov-is 55P, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is 980D, Innov-is 980K, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V7, JA1400, JA1450NT, JK17B, JS1410, JV1400, LS-2125/2160, LX27NT, QC-1000, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL-5500, XL-5700
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.