MFC-L2770DW
FAQs & Troubleshooting |
MFC-L2770DW
Date: 31/01/2022 ID: faq00100216_514
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is connected to a network or a telephone line , or has secure print data in the memory(Available only for certain models).
- To start printing, press on the control panel and then send a print job.
DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW
- Press Menu.
- Press or to display the [General Setup] option, and then press OK.
- Press or to display the [Ecology] option, and then press OK.
- Press or to display the [Auto Power Off] option, and then press OK.
- Press or to display the [8hours], [4hours], [2hours], [1hour], or [Off] option, and then press OK.
- Press Stop/Exit.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW
- Press .
- Press or to display the [Off], [1hour], [2hours], [4hours] or [8hours] option, and then press the option you want.
- Press .
DCP-L2550DW, MFC-L2715DW, MFC-L2770DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.