FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

HL-1870N

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 16/10/2006 ID: faq00002188_000

What kind of envelopes should I avoid?

  • Damaged, curled, wrinkled, or irregularly shaped envelopes
  • Extremely shiny or highly textured envelopes
  • Envelopes with clasps
  • Envelopes with self-adhesive closures
  • Envelopes of baggy construction
  • Envelopes not sharply creased
  • Embossed envelopes
  • Envelopes already printed by a laser printer
  • Envelopes are pre-printed on the inside
  • Envelopes that cannot be arranged uniformly when placed in a pile
  • Embossed envelopes
  • Envelopes constructed with a paper with a weight that exceeding the paper weight specifications for the printer.
  • Poorly manufactured envelopes with edges that are not straight or consistently square.
  • Envelopes with "baggy" construction or folds that are not sharply creased.
  • Envelopes with transparent windows, holes, cutouts or perforations.
  • Envelopes with clasps, snaps or tie strings.
  • Envelopes made with smooth or shiny paper.
  • Envelopes that are rough, highly textured, or deeply embossed.
  • Envelopes which do not lie flat or that are curled, wrinkled, or irregularly shaped.
  • Envelopes having an open flap with an adhesive that seals the envelope.

 

USE OF ANY OF THE ENVELOPES LISTED ABOVE MAY CAUSE DAMAGE TO YOUR PRINTER. SUCH DAMAGE IS NOT COVERED UNDER ANY WARRANTY OR SERVICE AGREEMENT.


Before printing envelopes, you must fan the stack well to avoid paper jams and misfeeds.

Related Models

HL-1230, HL-1240, HL-1270N, HL-1430, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2600CN, HL-3260N, HL-3450CN

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.