FAQs & Troubleshooting

Close

MFC-J5910DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-J5910DW

Not your product?

Date: 18/06/2010 ID: faq00000261_034

How do I clean the Scanner to improve the copy or fax quality?

To clean the Document Scanner, follow the step listed below:

  1. Lift the document cover (1).

     

  2. Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with a non-flammable glass cleaner.

    NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  3. In the ADF unit, clean the white bar (1) and the glass strip (2) with a soft lint-free cloth moistened with a non-flammable glass cleaner.

 


 

In addition to cleaning the glass strip with a non-flammable glass cleaner, run your finger tip over the glass strip to see if you can feel anything on it. If you feel dirt or debris, clean the glass strip again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning.

Related Models

DCP-6690CW, MFC-290C, MFC-295CN, MFC-490CW, MFC-5890CN, MFC-6490CW, MFC-6890CDW, MFC-795CW, MFC-J3520, MFC-J3720, MFC-J415W, MFC-J430W, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J825DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.