MFC-T800W
Preguntas frecuentes y Solución de problemas |
MFC-T800W
Fecha: 11/05/2020 ID: faq00100029_008
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
- Press Settings or Menu.
- Press the Up or Down arrow key to select Network and press OK.
- Press the Up or Down arrow key to select WLAN Enable and press OK.
- Press the Up or Down arrow key to select On or Off.
- Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Preguntas frecuentes relacionadas
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
DCP-7055W, DCP-J105, DCP-J140W, DCP-J152W, DCP-T500W, DCP-T510W, DCP-T700W, DCP-T710W, MFC-255CW, MFC-J200, MFC-J265W, MFC-J270W, MFC-J410W, MFC-J415W, MFC-J430W, MFC-J470DW, MFC-J497DW, MFC-T800W
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.