Innov-is VE2300
 |
Preguntas frecuentes y solución de problemas |
Innov-is VE2300
Fecha: 20/03/2015 ID: faqh00000009_000
Embroidery
-
Problem that occurs most in embroidery is misalignment of pattern.
This is caused mostly because a fabric is loose when it's set into an embroidery frame.
Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.
-
Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
Prepare a stabilizer material that is larger than an embroidery frame to be used.
Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.
Fusible side of stabilizer
Fabric(wrong side) - Use Brother embroidery threads and needle 75/11 for embroidery.
HE-120, Innov-is 1000, Innov-is 1200, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 500D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BP1430L, Innov-is BP1530L, Innov-is BP2100, Innov-is BP2150L, Innov-is BP3600, Innov-is BP3700, Innov-is NQ1400E, Innov-is NQ1600E , Innov-is NQ3600D, Innov-is NS1150E, Innov-is NS1750D, Innov-is NS1850L, Innov-is NS2750D, Innov-is NV960DL, Innov-is NV970L, Innov-is PE560L, Innov-is PE910L, Innov-is VE2300, Innov-is VM5100, Innov-is VM6200D, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE-430, PE-450, PE460L, PE500, PE535, PE550D, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, PE800, PE810L, PE830DL, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SE-270D, SE-350, SE600, SE625, SE700, ULT2001/2001N/2001C/2002D/2003D
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Observe que este formulario solo se utiliza para comentarios.