FAQ 및 문제 해결



FAQ 및 문제 해결

FAQ 및 문제 해결

날짜:27/11/2008 ID:faq00002541_000

How do I clean the paper pick-up roller?

If the paper pick-up roller is stained, the printer may not feed paper. In that case, clean the paper pick-up roller
as follows:

  1. Turn off the power switch and unplug the printer.
  2. Unplug the power cord and interface cable from the printer.
  3. Pull the paper tray out of the printer.
  4. Dampen a soft cloth with lukewarm water and wipe the separator pad (1) in the paper tray with it.
  5. Wipe the two paper pick-up rollers (1) inside the printer.
  6. Put the paper tray back in the printer.
  7. Make sure that you have turned off the power switch, and then connect the power cord and interface
    cable to the printer.
  8. Plug in the power cord and turn on the power switch of the printer.

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.
1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?
2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.