FAQ 및 문제 해결

닫기

SF2700

FAQ 및 문제 해결

FAQ 및 문제 해결

날짜:27/07/2012 ID:faqh00000477_005

How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)

When sewing gathers or darts, you can draw up the lower thread by hand so that some thread will be left over.
Before you draw up the lower thread, put the bobbin back in.

  1. Turn off the machine.

    Turn off the machine


  2. Raise the presser foot lever.

    Raise the presser foot lever.


    (1) Presser foot lever


  3. Remove the bobbin cover.

    Remove the bobbin cover.


    (1) Bobbin cover


  4. Reinstall the bobbin.

    Reinstall the bobbin.


  5. Pass the thread along the slit in the direction of the arrow, and leave it there without cutting it.

    Pass the thread along the slit in the direction of the arrow, and leave it there without cutting it.


  6. While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle.

    While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle.


  7. Pull on the upper thread to draw up the lower thread.

    Pull on the upper thread to draw up the lower thread.


    (1) Upper thread
    (2) Lower thread


  8. Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.

    Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.


    (1) Upper thread
    (2) Lower thread


  9. Replace the bobbin cover.

    Replace the bobbin cover.


    (1) Groove
    (2) Projection

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.
1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?
2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.