DCP-T710W

FAQ 및 문제 해결

DCP-T710W

날짜:26/04/2018 ID:faq00100347_503

The ADF can hold multiple pages and feeds each sheet individually.

Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in the ADF.

Document Sizes and Weights

Documents that are longer than 297 mm must be fed one page at a time.

IMPORTANT

DO NOT pull on the document while it is feeding.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric.
Make sure documents with correction fluid or written in ink are completely dry.

Lift up and unfold the ADF document support (1).
Fan the stack of paper well to avoid paper jams and misfeeds.
Adjust the paper guides (1) to fit the document size.
Place your document, face down, top edge first in the ADF underneath the paper guides until you feel the document touch the feed rollers and the LCD displays [ADF Ready].

IMPORTANT
DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.