MFC-L6900DW
FAQ 및 문제 해결 |
MFC-L6900DW
날짜:04/01/2018 ID:faq00100279_001
Change LDAP Configuration Using Web Based Management
Use Web Based Management to configure your LDAP settings in a web browser.
- Start your web browser.
-
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2 - Type a password if you have set one, and then click .
- Click Network on the machine's web page.
- Click Protocol in the left navigation bar.
- Select the LDAP check box, and then click Submit.
- Restart your Brother machine to activate the configuration.
-
On your computer, in Web Based Management's Address Book tab, select LDAP in the left navigation bar.
- LDAP Search
- LDAP Server Address
- Port (The default port number is 389.)
- Search Root
- Authentication
-
Username
This selection will be available depending on the authentication method used. -
Password
This selection will be available depending on the authentication method used.- If the LDAP server supports Kerberos authentication, we recommend selecting Kerberos for the Authentication settings. It provides strong authentication between the LDAP server and your machine.
- You must configure the SNTP protocol (network time server), or you must set the date, time and time zone correctly on the control panel for Kerberos authentication.
-
Kerberos Server Address
This selection will be available depending on the authentication method used. - Timeout for LDAP
- Attribute of Name (Search Key)
- Attribute of E-mail
- Attribute of Fax Number
- When finished, click Submit. Make sure the Status field reads OK.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.