ADS-2100
FAQ 및 문제 해결 |
ADS-2100
날짜:18/09/2012 ID:faq00002904_000
Clean the Separation Pad
Please follow the steps below to clean the Separation Pad.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Unplug the machine from the AC power outlet (electrical socket).
- Open the Top Cover (1) by lifting the bottom edge of the cover and the Front Cover (2) by pulling the Cover Release Lever (3) toward you.
- Press the tab on each side of the Separation Pad cover toward the center of the cover (1) on the inside of the Front Cover and then pull the Separation Pad Cover (2) open.
Be careful when touching the Separation Pad and its surrounding area in the machine. Otherwise, you could cause injury to yourself and serious damage to the machine.
-
Press the tab on each side of the Separation Pad toward the center of the pad assembly (1) and then pull the Separation Pad upward.
- Clean the Separation Pad with a lint-free cloth moistened with water.
- Attach the Separation Pad to the Separation Pad Cover.
- Close the Separation Pad Cover until it clicks.
- Close the Front Cover and the Top Cover.
- Plug the power cord back into the AC power outlet (electrical socket).
도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.