MFC-7860DN
FAQ 및 문제 해결 |
MFC-7860DN
날짜:04/02/2011 ID:faq00002041_009
Curled
Please check the following points to solve the problem:
NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.
- Choose Reduce Paper Curl mode in the printer driver when you do not use our recommended paper.
For Windows users:
NOTE: The steps and screens may differ depending on the operating system and application being used.- From the menu bar of an application, click File => Print.
- Check your printer name is chosen and click Properties.
- Click Advanced tab and then Other Print Options.
- Click Improve Print Output and select Reduce Paper Curl.
- Click OK to close the Other Print Options dialogue.
- Click OK to close the Properties dialogue.
- Click OK. The document will be printed.
For Macintosh users:
NOTE: The steps and screens may differ depending on the operating system being used.- Choose "Print" from the File menu and open the Print dialogue.
- Choose "Print Settings" from the print options pop-up menu.
- Click Advanced and then Improve Print Output....
- Select Reduce Paper Curl.
- Click OK.
- Click Print.
- From the menu bar of an application, click File => Print.
- Turn the paper over in the paper tray, and print again. (Excluding letterhead paper)
If the problems remains, switch the Anti-Curl Levers as follows:- Open the back cover.
- Lift the lever (1) and slide the two gray levers (2) in the direction of the arrow.
- Close the back cover and try printing again.
- Open the back cover.
- Lift up the output tray support flap.
도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.