FAQ 및 문제 해결

닫기

DCP-T220

FAQ 및 문제 해결

FAQ 및 문제 해결

날짜:01/03/2024 ID:faq00000308_514

Paper is Jammed Inside the Machine

If the paper is jammed, follow these steps:

  1. Unplug the machine from the electrical socket.
  2. Pull the paper tray (1) completely out of the machine.
    image
  3. Slowly pull the jammed paper (1) out of the machine.
    image
    IMPORTANT
    Be careful, as ink can easily get on your hands. If ink gets on your skin or clothing, immediately wash it off with soap or detergent.
  4. Make sure you look carefully inside (1) for any scraps of paper.
    image
  5. Push down on the Jam Clear Cover (1) on the back of the machine, and then open it (2).
    image
  6. Slowly pull the jammed paper out of the machine.
    image
  7. Close the Jam Clear Cover. Make sure the cover is closed completely.
    image
  8. Push the paper tray firmly back in the machine.
    image
  9. While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
    image
  10. Reconnect the power cord.

image

Additional paper jam clear operations

If the Power LED and the Warning LED continue to blink and you repeatedly experience paper jams, do the following:

  1. Unplug the machine from the electrical socket and open the manual feed slot cover.
  2. Load one sheet of thick A4 or Letter sized paper, such as glossy paper, in the manual feed slot. Insert the paper deep into the manual feed slot.
    image
  3. Re-connect the power cord.

    The paper you placed in the manual feed slot will be fed through the machine and ejected. If the thick paper is pushing any jammed paper out, remove the jammed paper.

    image

관련 FAQ

관련 모델

DCP-T220, DCP-T226, DCP-T420W, DCP-T426W

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.
1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?
2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.