MFC-7860DN
![]() |
FAQ 및 문제 해결 |
![](/g/b/img/product/mfc7860dn_as_cn_2.jpg)
MFC-7860DN
날짜:09/07/2015 ID:faq00000105_021
Reset the network settings to the factory default (video instructions available)
You can reset the network settings back to its default factory settings (resetting all information such as the password and IP address information) using the control panel as follows. Please note this function resets all wired and wireless network settings to the factory default.
NOTE: Videos shown below are from a representative product and may differ from your Brother machine.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
-
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
* This movie is being streamed from YouTube. (Opening new window.) -
Press Menu. Press the Up or Down arrow key to choose Network, and then press OK.
* This movie is being streamed from YouTube. (Opening new window.) -
Press the Up or Down arrow key to choose Network Reset, and then press OK.
Press 1 to choose Reset, and press 1 to choose Yes for reboot.
* This movie is being streamed from YouTube. (Opening new window.) -
The machine will re-start. Re-connect all the cables.
* This movie is being streamed from YouTube. (Opening new window.)
-
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
* This movie is being streamed from YouTube. (Opening new window.) -
Follow the steps below to reset the settings:
- Press MENU on the LCD screen.
- Press Network.
- Press the Up or Down arrow key to display Network Reset and then press Network Reset.
- Press Yes.
- Press Yes for 2 seconds to confirm.
* This movie is being streamed from YouTube. (Opening new window.) -
The machine will re-start. Re-connect all the cables.
* This movie is being streamed from YouTube. (Opening new window.)
도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.