FS50
 |
FAQs & Troubleshooting |
FS50
Date: 20/11/2012 ID: faqh00000019_000
Why does the needle keep breaking?
There could be several reasons why the needle keeps breaking.
- Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible.
- The needle could have been damaged or bent.
If so replace with a new one.
- Make sure the fabric is not pulled excessively when sewing.
Let the feed dogs move the fabric.
Do not pull the fabric.
- The combination of needle size, thread size and fabric is incorrect.
Be sure to use the correct needle and thread size for the fabric you are sewing.
(example: Denim-size 16 needle and 40-50 heavy duty thread).
One Point Advice Combination of fabric, thread and needle
Related FAQs
BC-2100/BC-2100PRW, BC-2500, BM-3500/2600, CS-8120, DS-120, DS1300, DS-140, FS101, FS50, GS1700, GS2700, GS3700, GS3710, GS3750WT, Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 30, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 55P, Innov-is 900, Innov-is 950, Innov-is Ie, Innov-is V5, Innov-is V5 LE, JA1400, JA20, JK17B, JS1410, JS1420, LS-2125/2160, LX27NT, NX-400Q/400, NX-600, SuperGalaxie 3000/3000C/3000D/3100D, XL-5050/5060/5070, XT37
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.