FAQs & Troubleshooting

Close

PT-D600

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 09/08/2023 ID: faqp00100594_000

I get an error message and cannot update the firmware. (Windows 10 or later)

To update the firmware, do the following:

 

  1. Turn the printer on and connect your computer to the printer using a USB cable.
  2. Download Firmware Update Tool from the [Downloads] section of this website.
  3. Extract the files from the downloaded ZIP archive, and then double-click "PtTrExp.exe" to install the tool.
  4. Click the [Transfer] button.
    Transfer button
  5. When the following error message appears, click [OK].
    Error message 1
  6. Click the [Transfer] button again.
    Transfer button
  7. When the following error message appears, click [OK].
    Error message 2
  8. Click the [Transfer] button again, and this time the firmware update will be completed.
    Transfer button
     

If the above steps do not resolve the issue, do the following:
 

  1. Turn the printer off. 
  2. Press and hold down the following keys/buttons to turn the printer on in Transfer mode. 
    <PT-D410/D450/D600/E500/H500>
    Press and hold down the [Preview] key and the [Power] key until the printer turns on.
    <PT-P700>
    Press and hold down the [Editor Lite] button and the [Power] button for more than 5 seconds until the printer turns on. 
  3. Connect your computer to the printer using a USB cable.
  4. Download Firmware Update Tool from the [Downloads] section of this website.
  5. Extract the files from the downloaded ZIP archive, and then double-click "PtTrExp.exe" to install the tool.
  6. Click the [Transfer] button to update the firmware. 
    Transfer button

Related Models

PT-D450, PT-D600

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.