PR1050X
FAQs & Troubleshooting |
PR1050X
Date: 01/12/2016 ID: faqh00100526_000
Temporary needle bar setting
After embroidering begins, the machine can be stopped at a color change and a different needle bar can be specified for the next color to be sewn.
By substituting an upper thread color already threaded on a different needle bar, the time for sewing can be saved. For example, similar color thread can be substituted for temporary use.
Specifying Temporary Needle Bar Setting
-
Touch .
→ The temporary needle bar setting screen appears.
-
Touch the key for the needle bar threaded with the thread that you wish to embroider with.
→ The needle bar number changes and appears to indicate the selected needle bar.
→ To cancel the setting, touch .
-
Touch .
→ The embroidering screen appears again.
The thread color (needle bar) cannot be changed in the middle of an area that is being sewn.
Uninterrupted embroidering (monochrome)
A selected pattern can be stitched out in one color instead of multicolor. The machine will hesitate but not stop between color steps, and then continue till the pattern is completed.
-
Touch the key for the needle bar threaded with the thread you wish to embroider uninterruptedly.
-
Touch for the multicolor steps to become shaded and the selected pattern will embroider in a single color, instead of changing the thread while embroidering.
→ The thread color displayed on the screen will be grayed out.
• Touch again to return to the pattern's original settings.
-
Even if uninterrupted embroidering has been set, the DST thread trimming function can be used.
* Refer to "How do I set the machine to trim the threads between the characters?".
- After finishing the embroidery, uninterrupted embroidery will be canceled.
Content Feedback
Please note this form is used for feedback only.