NX-400Q/400
FAQs & Troubleshooting |
NX-400Q/400
Date: 21/03/2013 ID: faqh00000686_000
For better results when sewing stretch fabrics
To achieve better results when sewing your project with stretch fabrics, refer to the following tips.
- To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing on stretch fabrics.
- Use thread for knits or a stretch stitch.
- First, baste the pieces of fabric together, and then sew without stretching the fabric.
(1) Basting
- Place thin paper or stabilizer material under the fabric and sew it together with the fabric.
* When you have finished sewing, tear off any excess paper.
(2) Stabilizer material or thin paper
- Decrease the pressure of the presser foot. (It is applied to models equipped with the function to adjust the presser foot pressure)
BC-2100/BC-2100PRW, BC-2500, DS-120, DS1300, DS-140, FS101, FS50, Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 30, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 55P, Innov-is 900, Innov-is 950, Innov-is Ie, Innov-is V5, Innov-is V5 LE, NX-400Q/400, NX-600
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.