Innov-is V3 SE
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inovv3seeas.jpg)
Innov-is V3 SE
Date: 07/11/2012 ID: faqh00000676_001
If the thread breaks during sewing.
- Press the “Start/Stop” button to stop the machine.
- If the upper thread is broken, redo the upper threading. If the bobbin thread is broken, press
.
- Press "OK". After the thread is automatically cut, the carriage will move.
- Unlock the frame-securing lever and remove the embroidery frame.
Be careful not to apply strong force to the fabric at this time. Otherwise, the fabric may loosen in the frame.
- Insert a wound bobbin into the machine.
- Press "OK". The carriage will return to its original position.
- Attach the embroidery frame.
- Press
.
- Press "-1", "-10", "-100" or "-500" to move the needle back the correct number of stitches before the spot where the thread broke.
- If you cannot move back to the spot where the thread broke, press
to select the color and move to the beginning position of that color, then use "+1", "+10", "+100" or "+500" to move ahead to slightly before where the thread broke.
- If you cannot move back to the spot where the thread broke, press
- Press "CLOSE" to return to the original screen.
- Press the “Presser Foot Lifter” button to lower the presser foot, and press the “Start/ Stop” button to continue sewing.
Related FAQs
Innov-is V3, Innov-is V3 SE, Innov-is V5, Innov-is V5 LE
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.