4234D
FAQs & Troubleshooting |
4234D
Date: 08/12/2017 ID: faqh00000586_001
How to attach and remove the presser foot
- Turn off the main power and light switch or disconnect the electric supply plug.
- Raise the presser foot lever.
- Turn the hand wheel so that the mark on the hand wheel is aligned to the line on the machine.
- Push the button on the presser foot holder and the standard presser foot will be released.
- Raise the presser foot farther by pushing the presser foot lever upward. Then remove the presser foot and store it in a safe location.
- Again, raise the presser foot farther by pushing the presser foot lever upward. Then place the presser foot just under the presser foot holder <A> so that the groove in the bottom of the presser foot holder <B> is aligned and catches the bar on the top of the foot <C>. Then lower the presser foot lever to attatch the foot, pushing the button on the presser foot.
4234D
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.