HL-5040
 |
FAQs & Troubleshooting |
HL-5040
Date: 16/10/2006 ID: faq00000292_013
What kind of memory can I use?
For HL-5040
This printer has 8 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 136MB by installing a commercially available DIMM (Dual In-line Memory Module).
For HL-5050 and HL-5070N
These printers have 16 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 144 MB by installing a commercially available DIMM (Dual In-line Memory Module).
The following DIMM size can be installed:
| Size |
Manufacture |
No. |
| 16 Mbyte | TECHWORKS | 12456-0001 |
| 32 Mbyte | TECHWORKS | 12457-0001 |
| 64 Mbyte | TECHWORKS | 12458-0001 |
| 128 Mbyte | TECHWORKS | 12459-0001 |
For more information, visit Techworks web site at http://www.techworks.com/
In general, the DIMM that can be used with the HL-5040, HL-5050 and HL-5070N must have the following specifications:
| Type: | 100 pin and 32 bit output |
| CAS Latency: | 2 or 3 |
| Clock frequency: | 66 MHz or more |
| Capacity: | 16, 32, 64 Mbyte or 128 Mbyte |
| Height: | 35 mm (1.4 inches) or less |
| Parity: | None |
| DRAM Type: | SDRAM 4 Bank |
Additional memory is useful and may be necessary if you are using the Page Protection function.
For HL-5070N
You have to expand the printer memory by adding a DIMM to use the FTP/IPP protocol.
Related FAQs
HL-5040, HL-5050, HL-5070N
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.