DCP-T520W
 |
FAQs & Troubleshooting |
DCP-T520W
Date: 13/10/2022 ID: faq00000027_525
Print the Network Configuration Report
The Network Configuration Report lists the network configuration, including the network print server settings.
- Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
- If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again.
- You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC Address on the report, for example:
- IP address: 192.168.0.5
- Subnet mask: 255.255.255.0
- Node name: BRN000ca0000499
- MAC Address: 00-0c-a0-00-04-99
DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
- Press Menu.
- Press
or 
to select the [Print Reports] option. Press OK. - Press or to select the [Network Config] option. Press OK.
- Press the Mono Start or Colour Start button.The machine prints the current Network Configuration Report.
MFC-T920DW/MFC-T925DW
- Press Settings.
- Press or to make your selections:
- Select [Print Reports]. Press OK.
- Select [Network Config]. Press OK.
- Press
. The machine prints the current Network Configuration Report.
DCP-T520W, DCP-T525W, DCP-T820DW, MFC-T920DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.