HL-2250DN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl2250dn_eu_as.jpg)
HL-2250DN
Date: 25/07/2019 ID: faq00000006_029
Black lines down the page
Please check the following points to solve the problem:
-
(For models with Automatic Document Feeder only)
Wipe the scanner glass strip with a dry lint free soft cloth.
-
Clean the primary corona wire inside the drum unit by sliding the green tab.
Please refer to the instructions, "Clean the corona wire of the drum unit.".
-
Make sure the green tab of the primary corona wire is at the home position (
).
-
The drum unit may be damaged. Put in a new drum unit.
Please refer to the instructions, "REPLACE DRUM".
-
The toner cartridge may be damaged. Put in a new toner cartridge.
Please refer to the instructions, "REPLACE TONER".
- The fuser unit may be contaminated. Call your dealer or Brother Customer Service.
DCP-L2520D, DCP-L2531DW, DCP-L2540DW, DCP-L2541DW, DCP-L5600DN, HL-2130, HL-2240D, HL-2250DN, HL-L2321D, HL-L2351DW, HL-L2361DN, HL-L2366DW, HL-L5000D, HL-L5100DN, HL-L6200DW, MFC-L2701D, MFC-L2701DW, MFC-L5900DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.