Innov-is A16

FAQs & Troubleshooting

Innov-is A16

Date: 23/04/2020 ID: faqh00101510_002

When the machine is turned on, the LCD will light up and the following screen is displayed.

To change the displayed settings, use the operation keys and stitch pattern selection dial.

No.

Display

Item Name

Explanation

(1)

Needle position setting

Shows whether the needle is in the programmed raised or lowered position.

Down position

Up position

(2)

Stitch length

Shows the stitch length of the currently selected stitch pattern.

When is displayed around , the stitch length is set to the default value.

(3)

Stitch width

Shows the stitch width of the currently selected stitch pattern.

When is displayed around , the stitch width is set to the default value.

(4)

Automatic reverse/
reinforcement stitching

Shows that the automatic reverse/reinforcement stitching is currently turned on.

Stitch pattern display window

The stitch number and presser foot are shown in the stitch pattern display window.

(1) Stitch number

(2) Presser foot

The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the Stitch pattern display window.

Innov-is A16

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.