FAQs & Troubleshooting

Close

ADS-2700W

FAQs & Troubleshooting

FAQs & Troubleshooting

ADS-2700W

Not your product?

Date: 15/02/2018 ID: faq00002886_500

Replace the Brake Roller

Your machine is equipped with a scan counter that automatically counts how many times the machine has scanned. After approximately 100,000 scans, you may have to replace the Brake Roller.

  1. Press the release tab to open the Front Cover (1).
  2. While pushing the left side of the Brake Roller Cover (1) from the back of the machine, pull the cover down.
  3. Lift the shaft of the Brake Roller (1) with your finger to remove the roller.
  4. Fit the shaft of the new Brake Roller (1) into the slot in the opening and insert the Brake Roller into the machine.
  5. Close the Brake Roller Cover.
  6. Close the Front Cover.
NOTE

The touchscreen or LED indications do not display either a Replace Roller or Replace Parts message.

Related FAQs

Related Models

ADS-2200, ADS-2700W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.