QL-1110NWB
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lpql1110nwbeas.jpg)
QL-1110NWB
Date: 10/01/2023 ID: faqp00100577_000
Although "Auto Power On" or "Power On When Plugged in" is set to On in the Printer Setting Tool, the printer does not turn on automatically.
Your printer's design assumes that you leave it plugged in for an extended period of time - for example, you turn it on when you start work in the morning and turn it off when you finish work in the evening.
Due to the energy-saving design of the circuits, the printer requires some time before it turns on automatically after you plug the printer in again soon after unplugging it.
The length of time required for your printer to turn on automatically soon after being unplugged depends on your printer's model and the voltage - refer to the table below for this information.
Printer Model | Power Supply | |
---|---|---|
100 V | 200 V | |
TD-4550DNWB | 20 minutes maximum | 20 minutes maximum |
QL-820NWB/820NWBc | 39 seconds maximum | 75 seconds maximum |
PJ-722/723/762/763/763MFi/773 PT-E800T/E800TK/E800W/E850TKW PT-P900/P900W/P950NW QL-800 QL-1100/1100c/1110NWB/1110NWBc TD-2020/2120N/2130N |
40 seconds maximum | 90 seconds maximum |
TD-2020A/2030ABK/2125N/2125NWB/2135N/2135NWB | 120 seconds maximum |
PJ-723, PJ-763, PJ-763MFi, PJ-773, PT-E800T, PT-E850TKW, PT-P900W, PT-P950NW, QL-1100, QL-1110NWB, QL-800, QL-820NWB, TD-2020/2020A, TD-2130N, TD-2135N
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.