PT-P710BT
FAQs & Troubleshooting |
PT-P710BT
Date: 16/06/2020 ID: faqp00000060_024
The printed label contains blank horizontal lines.
A horizontal line can be a result of some dust or dirt collecting on the surface of the Print Head or Head Roller. This can be corrected by cleaning.
Use an optional head cleaning cassette (TZe-CL4) or use a cotton swab to gently wipe dirt from the Print Head.
More details about a head cleaning cassette, see the FAQ: "How is the print head cleaning cassette used?"
Please follow the instructions below to clean the Print Head or Head Roller.
> How to clean the Head Roller
How to clean the Print Head
- Turn off the printer and disconnect the USB cable.
- Open the cassette cover and remove the tape cassette.
-
Gently wipe dirt from the Print Head using a cotton swab.
1* : Print HeadDo not touch the Print Head with your bare hands. It is so hot that you may get burned.
How to clean the Head Roller
- Turn off the printer and disconnect the USB cable.
- Open the cassette cover and remove the tape cassette.
-
Gently wipe dirt from the Head Roller using a cotton swab.
PT-P710BT
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.