FAQs & Troubleshooting

Close

CM700

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 31/07/2015 ID: faqh00000690_001

The mat cannot be recognized.

Possible Causes (or Results)

Case1 : The dotted marks on the part of the mat that is inserted are dirty.

Case2 : The dotted marks on the part of the mat that is inserted are hidden by material that was attached.

Case3 : The mat was inserted so that the side with the material attached is facing down.

Case4 : The scanner glass is dirty.

Case5 : A mat that cannot be recognized has been inserted.

 

Solutions

----- Case1 -----

Clean the dotted marks on the mat and their surrounding area.

img

 

----- Case2 -----

Attach the material while keeping it within the adhesive area of the mat.

img

 

----- Case3 -----

Insert the mat so that the side with the material attached is facing up.

img

 

----- Case4 -----

Clean the scanner glass from the bottom of the machine.

>> For details, see  “Cleaning the scanner glass”.

image

 

----- Case5 -----

If a mat designed specifically for this machine is not being used, use the specially designed mat.

 

Related FAQs

Related Models

CM700

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.