DCP-T426W
FAQs & Troubleshooting |
DCP-T426W
Date: 28/01/2022 ID: faq00100761_000
The Wi-Fi LED light does not flash when I press and hold the Wi-Fi button.
Make sure you press and hold the Wi-Fi button for at least 2 seconds.
If the LED light still does not flash, check the following:
-
Have you finished setting up your Brother machine?
Make sure you have completed all setup steps, including the ink system preparation or ink cartridge installation, and printed the Print Quality Check Sheet, as instructed in the Quick Setup Guide.
-
Is the Jam Clear Cover closed?
Close the Jam Clear Cover on the back of your machine, and then press the COLOR COPY button.
-
Is there paper in the paper tray?
Load paper in the paper tray, and then press the COLOR COPY button.
If the problem continues, check whether any other LED lights indicate an error.
> Click here to see "Error and Maintenance LED Indications".
DCP-T420W, DCP-T426W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.